Equipment

Professional wiring equipment ensure quality and rapid turn around.

Machine 1: Schleuniger PS9500 Wire cutter and stripper

Machine 1: Schleuniger PS9500 Wire cutter and stripper

PowerStrip 9500.

Wire/Cable types:

  • Stranded wire/cable max 12mm O.D.
  • Solid wire/cable.
  • Shielded cable.
  • Coaxial cable.
  • Triaxial cable.
  • And many more.

 

Machine 2: GLW CS60 wire stripper

Machine 2: GLW CS60 wire stripper

The CS 60 electric wire stripper is easy and intuitive to operate. The entered values are clearly visualised on the display. The cross-section and stripping length can be adjusted in seconds, making the CS 60 ideal for small series applications. The short insertion length and visible working area enable fast and fatigue-free working. The clamping force is automatically adapted to the cable cross-section. This avoids pressure points on sensitive areas of the insulation. Options • Shaped, radius and parallel blades for special cables • Diamond-coated clamping jaws for very hard insulation materials Simple, intuitive operation Cross-section range: 0.08-6 mm2 Fast cycle time Full and partial extraction Automatic clamping force adjustment Compact and mobile, with carrying handle V-blade for all common cable types

Machine  3: GLW MC40 stripper and crimping

Machine 3: GLW MC40 stripper and crimping

Fast and precise stripping and crimping The electro-pneumatic stripping and crimping machines MC 40-1 and MC 40L reliably process loose wire-end ferrules with plastic collars. The MC 40-1 is equipped as standard with crimping tools with cross sections of 0.5-1.5 mm². Optional tool kits are available for cross sections 0.25-0.34/2.5/4 mm² and AWG conductors (thick insulation). The MC 40L processes cross-sections of 4/6 and 10 mm². Both machines can be adjusted to the desired cross-section and crimping length in just a few simple steps. Stripping and crimping take place in a single work step. When the crimping dies are changed, all variable parameters are automatically set correctly. Quick cross-sections change Cost savings through processing of loose wire-end ferrules Simple operation 41 different wire-end ferrules processible (accessories required) Length adjustment in just a few seconds.

Machine 4: GLW EC65 Crimping

Machine 4: GLW EC65 Crimping

For flexible crimping of contacts, The EC 65 electric crimper presses various types of contacts. The crimping process is actuated via a foot switch. This leaves the operator’s hands free to insert the conductor and contact. The contact can be fixed before the crimping process via the two-step operating mode. Even complex contacts can thus be processed easily and precisely. The crimp-cycle monitoring function guarantees consistently high quality. The carrying handle and lightweight construction make the EC 65 perfect for mobile use. The dies can be easily changed in a few simple steps. In addition to a large number of standard dies, special designs are also possible.

Machine 5: WIRMECK WSC15

Machine 5: WIRMECK WSC15

The WSC15 stripper crimper by WIRMEC performs operations of stripping and crimping of terminals on electric cables. The machine does not require any additional kit to perform special processing, short stripping, sections very small and very short cables. This machine can fitting a lot of types of applicators, without to change anything. The grippers and the cutting blades are closing in the symmetrical movement keeping the wire always in axis with the applicator. 

Machine 6: Elumatic TS161

Machine 6: Elumatic TS161

  • Accuracy is achieved by cutting from below for 90° saw cuts and angled cuts
  • Wide pivoting range of up to 45° to the left and 0° to the right
  • The special pivoting mechanism with integrated turn table enables working from the front at any angle setting
  • The back fence is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles
  • Manual saw feed
  • Equipped with saw blade and machine base as standard
  • Pneumatic material clamping (vertical)
  • Pulsed coolant system
Machine 7: Komax Gamma 311

Machine 7: Komax Gamma 311

Automatic wire processing machine.

Automatic cut.

Automatic strip

Automatic crimp 60mm-30m

Ultradonic Splicing System Branson 2032S

Ultradonic Splicing System Branson 2032S

Ultrasonic cable splicing system.

  • A full-range ultrasonic splicing system capable of splicing from 0.35 to 32mm² wire
  • Automatically adjustable splice parameters and parameter sequencing
  • Uniquely designed 4-lobe keyed tip and 4-surface anvil provides longer tool life - and the lowest maintenance cost in the industry!
  • Replaceable tip technology provides high tool life at low cost
  • Patented vertical stacking design prevents side splicing, a major cause of field failures
  • Patented closed-loop amplitude control helps ensure weld consistency
Machine 8: Artos C11

Machine 8: Artos C11

· Ideal for high volume or high mix production needs.

· Cutting edge digital servo technology.

· Best in class performance and value.

· Simple to operate and maintain.

· Robust design.

· Low operating cost.